Rifatron MV-1648 Especificaciones descargar pdf (Pagina 59)

6-7-8. Factory Setup

① Move to {Menu} Æ {Setup} Æ {System} Æ {7. Factory Setup}.

② Select {Yes} when Initialization (Yes/No) Window appears.

Note that all setting data will be initialized and it goes back to Factory Default Value.

6-7-9. RS232C Port

① Move to {Menu} Æ {Setup} Æ {System} Æ {8. RS232C Port}.

② On the selection window, select the device using the arrow keys and the Select button.

6-7-10. Error Alarm Action

Alarm is to notify occurrences such as events [Sensor, Motion and Audio] and system incidents [Video Signal

disconnected/ HDD full/ FAN fail/ HDD fail/ HDD warning] to [Alarm/ E-mail/ Relay01/ System check].

① Move to {Menu} Æ {Setup} Æ {System} Æ {9. Error Alarm Action}.

② Select [Alarm/E-mail/Relay01/System Check]. The user can select all by ticking as shown below.

[Figure 5-53. Error Alarm Action]

※ System Check

System Check is to pop up the System Check Window on the monitoring screen. It indicates [Buzzer /

E-mail / Relay Device / System Check]

6-7-11. Error Alarm Duration

① Events and others

② Move to {Menu} Æ {Setup} Æ {System} Æ {10. Error Alarm Duration}.

③ In the selection window, set Alarm out time using the arrow keys and the Select button.

6-7-12. Menu Time Out

If no input is made in the System Setup menu using the front buttons, remote controller, or mouse, the system

automatically shifts to real-time monitoring mode.

① Move to {Menu} Æ {Setup} Æ {System} Æ {11. Menu Time Out}.

② On the selection window, select the time zone you want to set using the arrow keys and the Select button.

Off

Automatic Menu Exit is not used.

※ The user can exit the menu by pressing the [ESC] button in the System

menu..

1/2/3 MIN

If there is no input using the front button, remote controller, or mouse, the

system will shift to real-time monitoring mode.

1 2 ... 54 55 56 57 58 59 60

Sin comentarios

Rifatron MV-1648 Especificaciones Pagina 59